Index of Equipment:
Concrete Mixers (Ian dickie BM175)
Applications: Concrete mixers are used when the amount of concrete needed is small to medium. Concrete mixers are used by small to large contractors to mix concrete
Recommend for: Contractors and DIY
Specifications:
| Load unmixed | 250litres |
| Load mixed | 175 litres |
| Drum speed | 22-26 Rpm |
| mix cycle | 3min |
| loading height | 1390mm |
| mass | 295kg |
Operation and Safety:
- Only tow with the drum opening in the air.
- Use a hose and rinse of concrete at the end of each day.
- Operator to wear necessary PPE: Safety boots, Goggles, Gloves, Ear protection and dust mask and hard hat as required.
- Don’t work this equipment without a fuel cap, air filter and a recoil starter.
Plate Compactor 130-150 kgs
Application: Compacting thin layers of soil and preparing paving soil.
Recommended for: Sand/Gravel, Sub base, Base
Specifications:
| Plate size: | 450mm x 500 mm |
| Mass: | 150kgs |
| Compaction force: | 20Kn |
Operation & Safety:
- Compact with thin layers of soil not more that 100mm or one brick high.
- Best compaction result comes with moist material.
- Don’t work this equipment without a fuel cap, air filter and a recoil starter.
Operator to wear necessary PPE: Safety boots, Goggles, Gloves, Ear protection and dust mask and hard hat as required.
HIRE NOW!Reversible Plate compactor
Application: Compacting thin layers of soil and preparing paving soil.
Recommend for: Contractors and DIY
Specifications (Model dependant):
| Plate size: | 500mm x 695mm |
| Centrifugal force: | 30 kN |
| Frequency(hz): | 95 |
| Travel speed: | 24-26 m/min |
| Weight: | 186 kgs |
Operations & Safety:
- Thin layers of soil not more than 175mm high.
- Best compact result comes with moist material.
- Don’t work this equipment without a fuel cap, air filter and a recoil starter.
- Operator to wear necessary PPE: Safety boots, Goggles, Gloves, Ear protection and dust mask and hard hat as required.
Rammer 4 stroke
Application: This equipment is made for compacting in trenches, back filling, and small areas and building sides.
Specification:
| Working mass – | 70kg |
| Speed | +- 15-18m/min |
| Blow/ Force – | 14.8k |
| Foot – | 280 mm x 330 mm |
| Frequency: | 12 Hz |
| Amplitude: | 65-75mm |
Operations & Safety:
- Don’t over compact your material, don’t operate on solid material: concrete, steel or rock.
- Don’t force the machine
- Don’t work without recoil starter, fuel cap and air filter
Operator to wear necessary PPE: Safety boots, Goggles, Gloves, Ear protection and dust mask and hard hat as required.
HIRE NOW!Rammer Diesel LT800
Application: Sand/Gravel, Silt, Clay, Subbase/Base
Specification:
| Working mass: | 85kgs |
| Speed: | 13-16m/min |
| Force | 21.4kN |
| Foot: | 330 x 330mm |
| Frequency: | 12Hz |
| Amplitude: | 75 – 85mm |
Operation & Safety:
- Don’t over compact your material, don’t operate on solid material: concrete, steel or rock.
- Don’t force the machine
- Don’t work without recoil starter, fuel cap and air filter
- Operator to wear necessary PPE: Safety boots, Goggles, Gloves, Ear protection and dust mask and hard hat as required.
Walk Behind Roller 650mm
Application: Compacting sand, gravel sub base and asphalt.
Specifications:
| Drum width – | 650 mm |
| Working mass – | 745 kg |
| Compact/ force – | 21.8 kN |
| Speed – | 0 to 3.6km/h |
| Frequency – | 58 Hz |
| Amplitude: | 0.52mm |
Operation & Safety:
- Thin Layers of soil not more than 100 to 175mm depending on material. Best compaction results come with moist material.
- Don’t work this equipment without oil fuel cap, air filter and a recoil starter.
- Operator to wear necessary PPE: Safety boots, Goggles, Gloves, Ear protection and dust mask and hard hat as required.
Walk Behind Roller 750mm
Application: Sand/Gravel, Subbase/Base
Recommended for: Contractors, trenching, paving etc.
Specification:
| Operating mass: | 981 kg |
| Force: | 27.3kN |
| Speed: | 0-3.6km/h |
| Drum width: | 750mm |
| Frequency: | 57 Hz |
| Amplitude: | 0.54mm |
- Operator to wear necessary PPE: Safety boots, Goggles, Gloves, Ear protection and dust mask and hard hat as required.
- Thin Layers of soil not more than 100 to 175mm depending on material. Best compaction results come with moist material.
Roller Sit On:
Application: Sand/Gravel, Subbase/Base
Recommend for: Contractors, trenching, paving etc.
Specifications:
| Operating weight: | 2695KG |
| Drum width: | 1200mm |
| Width: | 1310mm |
| Centrifugal force: | 52 Kn |
| Frequency: | 67 Hz |
| Amplitude: | 0.52mm |
| Speed: | 200m/min |
Operation & Safety:
- Ensure the operator is trained on the machine.
- ROPS system must be in place when operating the machine.
- Ensure all lights and reverse hooter is working.
- Operator to wear necessary PPE: Safety boots, Goggles, Gloves, Ear protection and dust mask and hard hat as required.
Poker Needles 26-75mm
Applications: For vibration concrete to remove voids that could occur when pouring concrete.
Recommended for: The poker needles vibrators are high frequency units for effective consolidation of concrete. For use in foundations, floors, columns, beams etc.
Specifications:
| Diameter: | 25-75mm |
| Length: | 4-6M |
| Head length: | 400-470mm |
| Vibr/min | 12000 |
| Weight: | 10-22Kgs |
Operation & Safety:
- Be careful not to get the poker stuck in rebar.
Operator to wear necessary PPE: Safety boots, Goggles, Gloves, Ear protection and dust mask and hard hat as required.
HIRE NOW!Drive Unit
Specifications: Honda Gx160 Petrol Engine 5.5 HP
Applications: The efficient way to vibrate concrete with power & driver unit, to avoid concrete voids. (Remove bubbles or air from concrete which makes it weak)
Operation & Safety:
- Operator to wear necessary PPE: Safety boots, Goggles, Gloves, Ear protection and dust mask and hard hat as required.
- Don’t work without recoil starter, fuel cap and air filter.
Poker Needle Electric 38-58mm:
Application: For vibration concrete to remove voids that could occur when pouring concrete.
Recommend for: The poker needles vibrators are high frequency units for effective consolidation of concrete. For use in foundations, floors, columns, beams etc.
Specifications:
| Diameter: | 38-58mm |
| Weight: | 11.3-15.2Kgs |
| Vibrations per minute: | 12000 |
| Frequency: | 50-60Hz |
| Protective hose: | 10M |
Operation & Safety:
- Be careful not to get the poker stuck in rebar.
Operator to wear necessary PPE: Safety boots, Goggles, Gloves, Ear protection and dust mask and hard hat as required.
HIRE NOW!Concrete Cutter
Applications: Use to do clean cuts into concrete or asphalt.
Recommended for: Ideal for cutting expansion joints. Asphalt when doing road crossing for cable work.
Specifications:
| Weight: | 140KGs |
| Blade: | 350MM/450MM/500MM |
| Max cutting depth: | 125MM/175MM/190MM |
Operation and Safety:
- Don’t work without recoil starter, fuel cap and air filter.
- Operator to wear necessary PPE: Safety boots, Goggles, Gloves, Ear protection and dust mask and hard hat as required.
Concrete Floor Grinder:
Application: Preparing or repairing floors
Recommended for: Contractors or DIY
Specifications:
| Weight: | 67Kg |
| Disc size: | 250mm |
Operating & Safety:
- Operator to wear necessary PPE: Safety boots, Goggles, Gloves, Ear protection and dust mask and hard hat as required.
- Water must be poured on the floor to save the grinding blades.
Power float & blades
Applications: Ideal to use for smoothing & finishing of large wet concrete areas.
Recommend for: Contractors
Specifications:
| Weight: | 70kg |
This float is fitted with a self-regulating centrifugal clutch.
Operating & Safety:
- Operator to wear necessary PPE: Safety boots, Goggles, Gloves, Ear protection and dust mask and hard hat as required.
- Before power floating leave the concrete to be partially set.
- If the concrete is still too wet the machine can tear up the surface.
If it is too dry it will not trim the high spots and fill the low spots
HIRE NOW!Scarrifier/ Scrabler:
Application: Concrete surface preparation.
Recommended for: Contractors restoring or overlaying concrete floors
Specifications:
| Scarifying path width: | 300mm |
Operation & Safety:
- Operator to wear necessary PPE: Safety boots, Goggles, Gloves, Ear protection and dust mask and hard hat as required.
- The operator must gradually lower the flails and not set the machine to low.
- Staring the machine at to low a setting can break the shaft and damage the flails.
Electric Breaker 10kg Bosch (GSH11E) SDS Max
Applications: Used for breaking of brick work and concrete slabs up to 70mm depth
Recommended for: DIY and Contractors
Specifications: 1500 Watt,
| Max impact energy | 16.8 J |
| weight: | 10.1 kg |
Impact Rate A1 rated speed 900-1890 Bpm (Blows per min)
Operation and Safety:
Always wear PPE when working with the tool, i.e., Safety shoes, goggles, gloves, ear protection and others required by site.
When breaking up a surface do not start in the middle, but chip away small blocks from the side working to the middle.
When the Tool is stuck never hold in the operation button when trying to remove it.
Do not use the machine on a long lead with a generator
HIRE NOW!Electric Breaker 16kg Bosch (GSH 16-28)
Application: Mostly used for breaking of concrete or asphalt up to 150mm thickness
Recommend for: Contractors or DIY
Specifications:
| 1750 Watt, | |
| Max Impact energy, 41 J, | |
| 17.9 kg tool holder 38mm interval hexagon | |
This is rated the highest material remover due to the 41 J single impact force
Operation and Safety:
Always wear PPE when working with the tool, i.e., Safety shoes, goggles, gloves, ear protection and others required by site.
When breaking up a surface do not start in the middle, but chip away small blocks from the side working to the middle.
When the Tool is stuck never hold in the operation button when trying to remove it.
Do not use the machine on a long lead with a generator
HIRE NOW!Hilti TE3000 AVR
Application: Breaking up Concrete, Asphalt etc.
Recommended for: For road building, repair work, pipe laying, concrete demolition etc.
Specification:
| Rated input: | 2070W |
| Single impact energy: | 68J |
| Hammering frequency: | 860 |
| Hand/Arm vibration exposure: | 1.5 |
| Length: | 808mm |
| Height: | 209mm |
| Weight: | 29.9kg |
Operation and safety:
Always wear PPE when working with the tool, i.e., Safety shoes, goggles, gloves, ear protection and others required by site.
When breaking up a surface do not start in the middle, but chip away small blocks from the side working to the middle.
When the Tool is stuck never hold in the operation button when trying to remove it.
Do not use the machine on a long lead with a generator.
HIRE NOW!Angle Grinder 9”
Application: Used for the cutting of Masonry, Concrete or steel.
Recommended for: Construction contractors who wants to cut steel, concrete, bricks etc.
Specifications:
| Rated power: | 2600 Watt |
| No-load speed: | 6500rpm |
| Disc diameter: | 230mm |
| Weight: | 5.2kg |
Operation and Safety:
- Always use gloves, ear protection and safety goggles when operating a grinder.
- Ensure that the grinder is fitted with a guard
- Guard shouldn’t be removed. Ensure the locknut is secure before starting to operate the machine.
Baby Grinder 4.5”
Application: Used for detailed work when cutting masonry, steel and concrete.
Recommended for: Construction and DIY clients who needs to do work in areas where it would be difficult to reach with a 230mm disc.
It was designed for concrete contractors, vehicle fabricators and other professionals who need a compact grinder. It is well suited for metal fabrication, concrete restoration, pipe fitting and more.
Specifications:
| Rated Power: | 900Watt |
| No-load speed: | 11500rpm |
| Disc diameter: | 115mm |
| Weight: | 2.1kg |
Operation & Safety:
- Always use gloves, ear protection, dust mask and safety goggles when operating a grinder.
Ensure that the grinder is fitted with a guard. Ensure the locknut is secure before starting to operate the machine.
HIRE NOW!Belt Sander
Application: Sanding of wood surfaces.
Recommend for: Thicker wood surfaces and wood floors, preferably to be used by someone with prior experience.
Specifications:
| Rated power: | 1200Watt |
| Belt size: | 100 x 610mm (model dependent) |
| Weight: | 5.7 kg |
Operation and safety:
- Always use gloves, ear protection, dust mask and safety goggles.
- While operating the machine the operator must always hold it as level as possible to achieve a smooth end surface and not creating dents.
Orbital Sander
Applications: Good finishing sander on woodwork surfaces as well as sheet metal, prior to painting or sealing.
Recommended for: Finishing sanding of wood surfaces.
Specifications:
| Rated power: | 600W |
| Pad and abrasive paper size | Pad 115 x 229mm Abrasive 115 x 280mm |
| Orbits per minute: | 6000 |
| Weight: | 3.1 kg |
Operation and safety:
- Always use gloves, ear protection, dust mask and safety goggles.
Sand along with the grain of the wood.
HIRE NOW!Random Orbital Sander
Applications: Multi-purpose machine for sanding & polishing even and cambered surfaces, wood, plastics, non- ferrous metals, sheet steel.
Recommended for: Finishing sanding of wood surfaces.
Specifications:
| Rated Power: | 310W |
| Pad & abrasive disc size: | 150mm |
| Orbits per minute: | 4000 – 10000 |
| Weight: | 2.4kg |
Operation & Safety:
- To achieve a smooth finish in wood don’t press too hard on the sander.
- Always use gloves, ear protection, dust mask and safety goggles.
Rotary hammer drill 2kgs SDS plus
Application: Drilling holes in concrete, bricks and cement.
Recommended for: Contractors and DIY clients.
| Rated Power: | 790W |
| Max impact energy: | 2.7J |
| Bit Holder: | SDS-plus |
| Weight: | 2.8kgs |
| Drilling range concrete: | 4 – 24mm |
| Optimal range: | 6 – 14mm |
| Max drilling in steel: | 13mm |
| Max drilling in wood: | 30mm |
Operation and safety:
- Be careful of electrical lines and water pipes in walls.
Always use gloves, ear protection and safety goggles.
HIRE NOW!Rotary hammer drill 5kg SDS plus
Application: Drilling bigger diameter holes in concrete, bricks and cement
Recommended for: Contractors and DIY clients.
| Rated Power: | 900W |
| Max impact energy: | 4.2J |
| Bit Holder: | SDS-plus |
| Weight: | 4.7kgs |
| Drilling range concrete: | 6 – 32 mm |
| Optimal range: | 14 – 25 mm |
| Max drilling in steel: | 13mm |
| Max drilling in wood: | 32mm |
Operation and safety:
- Always use gloves, ear protection and safety goggles.
- Be careful of electrical lines and water pipes in walls.
Rotary hammer drill 5kg Max
Application: Drilling bigger diameter holes in concrete, bricks and cement, small breaking work.
Recommended for: Contractors and DIY clients.
Specifications:
| Rated Power: | 1500W |
| Max Impact energy: | 12.5J |
| Bit holder: | SDS-Max |
| Weight: | 8.2 kg |
| Drilling range in concrete: | 12 – 45 mm |
| Optimal range: | 20 – 40 mm |
| Breakthrough drill bits: | 80mm |
Operation and safety:
- Always use gloves, ear protection and safety goggles.
- Be careful of electrical lines and water pipes in walls.
Rotary hammer drill 10kg Max
Application: Drilling bigger diameter holes in concrete, bricks and cement, small breaking work.
Recommended for: Contractors and DIY clients.
| Rated Power: | 1500W |
| Max Impact energy: | 5 – 18 J |
| Bit holder: | SDS-Max |
| Weight: | 11.1kg |
| Drilling range in concrete: | 12 – 52 mm |
| Optimal range: | 30 – 52 mm |
| Breaking range: | 45 – 80mm |
Operation and safety:
- Always use gloves, ear protection and safety goggles.
- Be careful of electrical lines and water pipes in walls.
Electric Drill (Steel)
Applications: Used when drilling into steel or sheet metal and wood or concrete on occasions.
Recommended for: Contractors and DIY
| Rated Power: | 750W |
| Rated Torque: | 6.8 Nm |
| Bit holder: | Keyed Chuck |
| Weight: | 2.4kg |
| Drilling range in aluminium: | 12 – 20 mm |
| Drilling range in wood: | 20 – 32 mm |
| Drilling in steel: | 8 – 13mm |
Operation and safety:
- Always use gloves, ear protection and safety goggles.
Be careful of electrical lines and water pipes in walls.
HIRE NOW!High torque electric drill
Application: High torque for power demanding applications such as Core drilling up to 162mm, drilling in steel from 14 – 20mm.
Recommended for: Contractors and DIY.
Specifications:
| Rated Power: | 1500W |
| Rated Torque (Slow screwing): | 14.5 – 50 Nm |
| Rated Torque | 5- 17 Nm |
| Bit holder: | Keyed Chuck |
| Weight: | 4.8kg |
| Drilling range Core Drill Masonry: | 162MM |
| Drilling range Core Drill Concrete: | 82mm |
| Drilling range in wood: | 30 – 50 mm |
| Drilling in steel: | 14 – 20mm |
Operation and safety:
- Always use gloves, ear protection and safety goggles.
Be careful of electrical lines and water pipes in walls.
HIRE NOW!Cordless Drill
Application: Light duty drilling, using machine as a screw driver for wood work like erecting cabinets etc.
Recommended for: Contractors and DIY
Specifications: For Bosch GSR 18-2
| Battery type and voltage: | Lithium Ion 18V (Model dependant) |
| Weight: | 1.5 KG |
| Max screw diameter: | 10 mm |
| Torque: | 24 – 63 NM |
| Max Drilling diameter in wood: | 38mm |
| Max Drilling diameter in Steel: | 13mm |
| Max Drilling in Masonry: | 16mm |
| Chuck capacity: | 1.5 – 13 mm |
Operation and safety:
- Always use gloves, ear protection and safety goggles.
Be careful of electrical lines and water pipes in walls.
HIRE NOW!Jig Saw
Applications: General cutting of soft wood up to 140mm depth as well as aluminium up to 20mm. Ideal to use for cutting out shapes in woodwork.
Recommended for: Contractors & DIY
Specifications:
| Rated Power: | 720 Watt |
| Cutting depth in wood | 140mm |
| Cutting depth in aluminium | 20 mm |
| Weight: | 2.3 kg |
Operation and Safety:
- Use the correct PPE, Goggles, Gloves, dust mask and ear protection.
- Never force the jigsaw sideways, this might cause the blade to break.
Electric mitre saw
Application: Cutting wood at precise angles.
Recommended for: Contractors & DIY, for example dry walling, wood projects, wood flooring etc.
Specification:
| Rated power: | 1650 Watt |
| Blade diameter: | 255-260mm |
| Bore size: | 25.4mm |
| Cutting depth at 0degree: | 90.5 – 95mm |
| Cutting depth at 45degree: | 67 – 90.5mm |
| Weight: | 12.4 kg |
Operation and safety:
- Use the correct PPE, Goggles, Gloves, dust mask and ear protection.
Always keep hand away from cutting blade.
HIRE NOW!Skillsaw Small (Circular Saw)
Applications: This saw is ideal for fast sawing progress in soft and hard wood.
Recommended for: Contractors & DIY
Specification:
| Rated power: | 1400Watt |
| Blade diameter: | 190 mm (small) |
| Weight: | 4.2kg |
| Blade revolutions: | 5500 Rpm |
| Cutting depth (90°) | 67mm |
| Cutting depth (45) | 48mm |
Operation & Safety:
- Always ensure that blade guard is secure and in place.
- Use the correct PPE, Goggles, Gloves, dust mask and ear protection.
Skill saw large (Circular Saw): 235mm
Application: This saw is ideal for fast sawing progress in soft and hard wood.
Recommended for: Contractors & DIY
Specification:
| Rated Power: | 2000 Watt |
| Blade diameter: | 235mm |
| Bore size: | 30mm |
| Cutting depth 0degree | 85mm |
| Cutting depth 45degree | 60mm |
| Weight: | 7.6 kg |
Operation & Safety:
- Always ensure that blade guard is secure and in place.
- Use the correct PPE, Goggles, Gloves, dust mask and ear protection.
Cut off Saw
Applications: Used for cutting of metal pipes, rods, angle iron etc. Machine can cut at angles of 45°
Recommended for:
Specifications:
| Rated power: | 1750 Watt |
| Blade diameter: | 305mm |
| Bore size: | 25.4mm |
| Cutting depth at 0degree: | 115mm |
| Cutting depth at 45degree: | 90mm |
| Weight: | 19.3 kg |
Operation and Safety:
- Always use the correct PPE, Goggles, Gloves, dust mask and ear protection.
Wall Chaser double blade
Application: Installing trunking in walls for cabling piping etc.
Recommended for: Contractors
Specification:
| Rated power: | 2400 Watt |
| Groove Width: | 3 – 40 mm |
| Groove Depth: | 20 – 65 mm |
| Weight: | 8.4 kg |
Safety and operation:
- Always use the correct PPE, Goggles, Gloves, dust mask and ear protection.
Magnetic base drill
Application: Ideal for working on vertical slanted or overhead surfaces.
Recommended for: Metal working Contractors
Specification (Model dependant)
| Diameter: | 12 – 32 mm |
| Magnetic retention force: | 25 kN |
| Weight: | 26 kg |
Operation & Safety:
- Always use the correct PPE, Goggles, Gloves and ear protection.
Bosch Laser Detector:
Application: For detecting cables, pipes, wooden beams etc when drilling/ cutting/ chasing into walls.
Recommend for: Contractors & DIY
Specs:
Detectable materials: Ferrous metals, non- ferrous metals, wooden studs, live cables.
| Detection depth, Steel Max: | 120mm |
| Detection depth, Copper Max: | 80mm |
| Detection depth, live cables: | 50mm |
| Detection depth, Wooden substructures: | 38mm |
Brush Cutter
Application: Cutting Grass, small brush etc.
Recommended for: Contractors & DIY
Specification:
| Weight: | 5.3Kgs |
| Power: | 1kw |
Operation & Safety:
- Ensure to book out the harness and face mask separately.
- Rent out with premix 2 Stroke and Petrol.
- Ensure container is returned, book out separately.
- Operator to wear necessary PPE: Safety boots, Goggles, Gloves, Ear protection and dust mask and hard hat as required.
Chain saw (based on stihl MS382)
Application: Landscaping, site establishment/ clearing etc.
Recommended for: Contractors & DIY
Specification:
| Cutting Length: | 50CM |
| Weight: | 6.2Kgs |
| Performance: | 3.9KW |
Operation & Safety:
- Show client how to start the chainsaw using the decompression valve.
- Ensure the chain is sharp and set up to the correct tension.
- Advice the client to never cut into sand, this will dull the chain very quickly.
- Rent out with premix 2 stroke oil and petrol, book out the container separately.
- Ensure the oil for the chain is filled on the machine.
- Depending on the amount of work/time the client wants to rent the machine more chain oil can/should be provided and booked out separately.
- Operator to wear necessary PPE: Safety boots, Goggles, Gloves, Ear protection and dust mask and hard hat as required.
Lawn Mower (Based on Honda HRU196)
Application: Grass cutting/ site/median clearing
Recommended for: Contractors & DIY
Specification:
| Cutting Width: | 482MM |
| Fuel tank capacity: | 1.1L |
Operation & Safety:
- Ensure blades are sharp and fitted correctly before renting out lawn mower.
- Ensure grass catcher is in good condition.
- Check blades and catcher on return for damage.
- Operator to wear necessary PPE: Safety boots, Goggles, Gloves, Ear protection and dust mask and hard hat as required.
High pressure washer: 130 bar electric
Application:
Cleaning with rotary nozzle of roofs, paving, floors etc.
Recommend for: Contractors & DIY
Specification:
| Pressure: | 130 Bar |
| Flow: | 10l/min |
Safety & Operations:
- Don’t place hand in front of the nozzle while working with machine.
- Tap must always be open before starting the machine.
- The nozzle gun must me open whenever the machine is in operation.
- PPE: Gloves, Goggles, ear protection, dust mask depending on material being cleaned.
High pressure washer: 200 bar diesel or petrol
Application: Cleaning with rotary nozzle of roofs, paving, floors etc.
Recommended for: Contractors & DIY
Specification:
| Pressure: | 200 bar |
| Flow: | 18l/min |
Safety & Operation:
- Don’t place hand in front of the nozzle while working with machine.
- Tap must always be open before starting the machine.
- The nozzle gun must me open whenever the machine is in operation.
- PPE: Gloves, Goggles, ear protection, dust mask depending on material being cleaned.
Water pump – 2” submersible:
Application:
This equipment is made to pump water from trenches or keep water at a certain level.
Can also pump clean sea water
Recommend for:
Specification:
| Maximum head: | 16m |
| Maximum capacity: | 600l/min |
This pump is self-prime
The pump switches on by float switch.
Safety & operation:
- This pump can only handle clean water.
- Do not let this pump work outside of water as it will burn out the electrical motor.
- Do not work in sludge with this pump
- Always wear PPE when working with the tool, i.e., Safety shoes, goggles, gloves, ear protection and others required by site.
Trash Pump 2”
Application:
Most types of water can be pumped with these pumps
Specifications:
| Maximum suction height | 7 m |
| Maximum head | 32 m |
| Solid handling | 25 mm |
| Water displacement | 795 L/min |
This is a prime pump (must have enough water in pump and pipes to operate it)
Safety & Operations:
- Can pump all types of water at any place
- Cannot pump sludge
- Always check oil level of engine and air filter
- Try to work with this pump as level as possible for the oil in the engine.
- Ensure the correct strainer is attached to the suction hose.
- Always wear PPE when working with the tool, i.e., Safety shoes, goggles, gloves, ear protection and others required by site.
Water pump – 3” trash pump
Application Most types of water can be pumped with these pumps
Recommended for Contractors and DIY
Specification:
| Maximum suction height: | 7m |
| Diameter: | 75mm |
| Total head: | 29M |
| Water displacement/ Discharge: | 1,515 l/min |
| Max solids diameter | 38mm |
Operation & Safety
- Can pump all types of water at any place
- Cannot pump sludge
- Always check oil level of engine and air filter
- Try to work with this pump as level as possible for the oil in the engine.
- Ensure the correct strainer is attached to the suction hose.
- Always wear PPE when working with the tool, i.e., Safety shoes, goggles, gloves, ear protection and others required by site.
Water pump – 4” trash pump
Application:
Most types of water can be pumped with these pumps
Specifications:
| Maximum suction head | 7m |
| Maximum head | 32m |
| Solid Handling | 50mm |
| Water displacement | 2,609 L/min |
This is a prime pump (must have enough water in pump and pipes to work it.)
Safety & Operation:
- Can pump all types of water with solids up to 50mm
- Cannot pump sludge
- Always check oil level of engine and air filter
- Try to work with this pump as level as possible for the oil in engine
- The maximum depth the suction hose can be used is 7m.
- Ensure the correct strainer is attached to the suction hose.
- Always wear PPE when working with the tool, i.e., Safety shoes, goggles, gloves, ear protection and others required by site.
Water pump – 6” trash pump:
Application: Pumping large quantities of water.
Recommended for: Contractors.
Specifications:
| Suction height: | 7.5M |
| Head: | 30.5M |
| Water displacement: | 4,935 l/min |
| Max solids diameter: | 50mm |
Operation & Safety:
- Can pump all types of water with solids up to 50mm
- Always check oil level of engine and air filter
- Try to work with this pump as level as possible for the oil in engine.
- The maximum depth the suction hose can be used is 7.5M
- Ensure the correct strainer is attached to the suction hose.
Always wear PPE when working with the tool, i.e., Safety shoes, goggles, gloves, ear protection and others required by site.
HIRE NOW!